Hello!I am trying to setup fritzbox to intergrate with 3cx.the fritzbox is connected via LAN to my first router (dlink). The pc with the 3cx is also connected on the dlink.so far i managed to register 2 extensions on the pc with 3cx, using 3cx sofrphone and x-lite. I made 2 more extensions for fritzbox but i cannot register them.I used similar configuration on the fritzbox as those i used with x-lite and 3cx soft phone.what an i doing wrong? Should i use a different config?Btw i tried also to register an extension with a softphone on my PDA (which is connected wireless to the dlink mentioned above). Again the extension is not registered.So how is it possible to register an extension on a machine with a different internal IP than the pc with the 3cx?I am using 3cx version 7.0.4744.0, free edition.thanks! I didnt understand what you mean, But i can tell you what can i do with the fritzbox connected to the 3cx.So, the main router is a dlink, and the fritzbox is only connected to it via lan wire.The fritzbox receives the wire for the landline, and on the fritzbox i have only one phone device that handle all the calls.Incoming calls: I can receive calls on my landline number, and i can have any extension of the 3cx ringing. (But i prefer to have the callls ringing to my phone device mentioned before for a few seconds, and if i dont answer it forwarded to any of the extensions or voicemail or receptionist)outgoing calls: from my phone device i can call directly, exactly as when i havent the PBX.From any other extension, i can also make outgoing calls via the landline.
Kel Kimble is his orange soda-loving friend. Kenan and kel full series of captain. With 61 episodes, this collection provides more then 7 hours of premium entertainment for all ages.The show centered around a character Kenan Rockmore, a high schooler who works at Rigby's mini grocery store.
Freenet Fritz Box 7170 Firmware Update
To do that i just have to dial one other extension on the fritzbox that i have for this reason, type a pin and then the phone number that i would like to call. It is obvious that there is a possibility to allow or deny those calls from one or more extensions.So what is that? Connected as ATA or as gateway? No, unfortunately you have to use the pin. But that isnt much annoying, thus it provide a way to control who can make those external calls and who cannot.Of course you can also specify up to 8 extensions that can have the ability to make those call. If you specify none, then all the extension can make external calls, but they should dial the pin.I dont know if is able to change this fritzbox's setting with telnet or by any other mean, so that it does not ask for a pin.An other idea is to add a rule in 3cx, that makes this: when one extension dials this ext number (the one mentioned before on the fritz), then wait for a while (you have to listen a confirmation code) and then dial the pin automatically, so that the user is not dialing anythine more except the ext+phone number.e.g. Lets say that the ext on fritz used for this manner is 101, and the pin is 1234.we could set a rule, that when someone ( eg ext 102), dials 101, then 3cx automatically dial the pin(in this case 1234) and then the user dials the phone number: so the user only dials 101+phone number.what do you think?
Fritzbox 7170 Sl Firmware Update
Is that possible to add such a rule?